The Death Of Carthage Hospital - 1732 Words

As I peered into the gallows of hell I realized that everything I’d known to this day would soon vanquish to dust before me. The lies built up into a monstrous wall would become easy to see through. I would know the truth of the changes made before my eyes and the changes made in me. 1. As I arrived at the hospital everything seemed normal, but for some unapparent reason I felt different. Today was the start of my new career in Wyoming, a career that would foreshadow the reputation of my past. I’m here to escape the horrors of Carthage hospital, to start over. I made my way through the crowd of rushing nurses, doctors assisting patients, and EMTs bringing more people finally making my way to the main hallway of the hospital.†¦show more content†¦Tindol s face, I could not tell if my answer was satisfactory or if I had just boasted on to a completely insufficient answer. Then he turned around and opened a mahogany cabinet, when he faced me he was holding a white lab coat. â€Å"Your answer to my question was remarkably exquisite, it showed me you re passionate about what you do.† He handed me the lab coat, â€Å"So, I would like to be the first to welcome you to Amelia South Hospital’s surgical team. I paged one of the best residents we have to show you around, he’s a pediatric surgeon.† Just then a charmingly pale man walked in, his hair blonde with wavy locks flowing in one fluent motion framing his gorgeous bone structure. â€Å"Just on time, his is Dr. Camden,† Dr. Tindol said interrupting my haze, â€Å" He’ll be showing you around today.† â€Å"Hello, it’s nice to meet you.† The pale man, Dr. Camden spoke as he stepped forward and reached out his hand. I graciously returned the offer and shook his hand. That was when I saw his eyes, his beautifully pale blue eyes the mixture of the clouds in the sky and the heavens above. â€Å"Dr. Evans, we should probably get going, a lot to see and less time to do so.† My haze interrupted once again. â€Å"Yes, of course Dr. Camden.† I nodded then motioned to the door, â€Å"After you.† Once we’d left theShow MoreRelatedThe General William Yarnel Slack835 Words   |  4 Pageslaw in the office of J. B Gordon at Columbia, Missouri, where he was admitted to the bar in 1837. At the age of 22 he passed his bar and established a private practice in Chillicothe, Livingston County, which continued to be he residence until his death. He was among the leading citizens and played an active part in establishing the present University of Columbia. (W. V. N. Bay, 1878) Early Military Life While living in Chillicothe he developed an inclination for the military life at an early timeRead MoreSon Of Tears, Chapter by Chapter.3874 Words   |  16 Pagesthe end of this chapter, the conversation ends when Monica goes to pray, and Augustine comes home only to have a word with his father. Chapter 3 Augustines talk with his father is not bad. He finds out that he might be going to the university in Carthage. This made Augustine happy, but not Monica. Monica and Augustine talk about the choice she made to not have him baptized, and about his future and how important his education is. Monica ends the night by giving advice to Augustine on women. ChapterRead MoreHadrians Wall2722 Words   |  11 Pagestemples of the South American Aztecs. In the centuries before the birth of Christ, the city-state evolved as the central form of governmental power in the Ancient world. Sovereignty was centralized in the great cities of Rome, Vienna, Carthage, Alexandria, Cologne, and Damascus. Unlike the nation states of modern times, there were no clear boundaries delineating spheres of influence. Instead, each city-state governed local territories, and exerted its political influence as far outwardRead MoreThe Crusades Paper3827 Words   |  16 Pagesthis outrage of plunder, Alexius Comnenus ordered them to be transmitted across the Bosporus which occurred August, 1096. `Lords, says the king, I will send you the brother of my wife; and I commit him into the hands of God-may He keep him from death! - and into your hands. And because you have fared forth for God, and for right, and for justice, therefore you are bound, in so far as you are able, to restore to their own inheritance those who have been unrighteous despoiled . And my wifes brotherRead MoreQuestion and Correct Answer7042 Words   |  29 Pagesfree will | | | | | ï‚ · Question 5 2 out of 2 points | | | Why is the Epic of Gilgamesh a first in known literary works?Answer | | | | | Selected Answer: |   Ã‚   It is the first to confront the idea of death | Correct Answer: |   Ã‚   It is the first to confront the idea of death | | | | | ï‚ · Question 6 2 out of 2 points | | | Why is King Solomons authorship of the Song of Solomon doubtful?Answer | | | | | Selected Answer: |   Ã‚   The female protagonists voice is strongerRead MoreRastafarian79520 Words   |  319 Pages47 Howell was again arrested, but this time he was acquitted on appeal. However, this event marked the end of his tenure as the â€Å"leading light† in the Rastafarian movement.48 In 1960 he was interned in a mental hospital, and after his release, he lived in relative obscurity until his death in 1981.49 During his period of prominence, Howell exhibited many of the characteristics that Weber associates with the charismatic persona. He was at the forefront of a movement that rejected the legitimacy

Lab 2 Microscopy and the Metric System Free Essays

Microscopy and the Metric System Margaret E. Vorndam, M. S. We will write a custom essay sample on Lab 2: Microscopy and the Metric System or any similar topic only for you Order Now Version 42-0090-00-01 Lab Report Assistant This document is not meant to be a substitute for a formal laboratory report. The Lab Report Assistant is simply a summary of the experiment’s questions, diagrams if needed, and data tables that should be addressed in a formal lab report. The intent is to facilitate students’ writing of lab reports by providing this information in an editable file which can be sent to an instructor. Exercise 1: Measuring Length, Weight, Volume, and Temperature Try the following conversions for practice. 40,000 ng =0. 24mg =0. 00024g50 cm =500 mm =0. 5m Procedure 1. Length: A metric ruler is useful for measuring items of length. The ruler below measures in mm, indicated by the small mm near 0. a. How many mm are there in 1 cm? 10, in a meter (m)? 1000 (Ruler is not to scale. See ruler in dissection kit. ) b. Locate a measurable object to use for this exercise. If the object is long, obtain a yardstick that includes a cm scale; they can be found in local hardware stores. c. Record the length of the object below and do the conversions: Name of object: ID card . 5 cm=85mm=0. 085m Volume: Always pour an approximate volume of liquid into a clean beaker and then from the beaker into the volumetric flask or graduated cylinder. This will minimize contamination of the parent liquid source. Dispose properly of any leftover liquid. Do NOT pour it back into the original container. Why? This is so the original liquid does not get contaminated. When using a pipet or dropper to measure liquid, pour an aliquot into a clean beaker and then draw up the liquid from the beaker into the pipet. NEVER try to draw up chemicals by mouth. Why? Chemicals could go into your mouth, which is potentially dangerous and should never be done no matter if they deemed â€Å"safe† or not. Weight: Use the pen scale from the lab kit to measure out exactly three grams of sugar. Make sure to tare the bag before adding the sugar. Why must the bag be tared before adding the sugar? This is done so the weight of the bag is not counted with the weight of the sugar. You must think about the weight of the bag when weighing out the three grams of sugar. How is the weight of the bag accounted for when the sugar is weighed? The bag is weighed first and then the 3 g of sugar is added on top of that weight so at the end the weight is more than 3g total due to the bag. Temperature: Practice converting the following with this conversion formula: 45 °F = 7. 2  °C 62 °F =16. 7  °C 98. 6 °F =37 °C Use a Celsius thermometer to measure the  °C temperature of several different aliquots of cold and warm tap water. Make sure to allow the thermometer to remain until the temperature is stable and no longer changes. Record the temperatures: Cold-15 °C Warm – 29 °C Hot- 48 °C Questions A. What laboratory equipment would be used to measure the following items? g flour| Beaker and scale| 36 mL water| Graduated cylinder| The length of a frog’s leg| ruler| 36 g water| Beaker/balance| 38? C| thermometer| Volume of a turtle*| Water displacement| 125? F| thermometer| Volume of blood| Graduated cylinder| Weight of a plant| Bag and scale| Weight of blood| Beaker and scale| Temperature of a fish ’s body| thermometer| Temperature of blood| thermometer| *This answer may require some creativity. How could it be done? B. Provide the calculation steps, including the conversion factor that would be needed to convert the following measurements, and the final answers. Use U. S. and liquid units where appropriate. 248 g| = 248,000 mg| 145,000 ? L| = 145mL| 536 mL| = 536 cc| 0. 372 kg| = 372 g| 0. 75 L| = 750,000 ? L| 20. 39 cm| = . 2039 m| 145,000? L*(10^-6L /1? L)*(1000mL/1L)=145mL .372kg*(1000g/1kg)=372g 20. 39cm*(1m/100cm)=. 2039m 145,000? L*(10^-6L /1? L)*(1000mL/1L)=145mL .372kg*(1000g/1kg)=372g 20. 39cm*(1m/100cm)=. 2039m 248g*(1000mg/1g)=248,000mg 536mL*(1cc/1mL)=536cc 0. 75L*(1? L/10^-6L)=750000 ? L 248g*(1000mg/1g)=248,000mg 536mL*(1cc/1mL)=536cc 0. 75L*(1? L/10^-6L)=750000 ? L C. Provide the calculation steps, including the conversion factor that would be needed to convert the following measurements, and the final answers. Use US and liquid units where appropriate. 3 cups= . 711 L7,893 mg = . 0174 lb 2. 25 oz= 66. 53 cc36? C= 96. 8 ? F 7893mg*(1lb/453592mg)=0. 0174lb 36? C*(9/5)+32=96. 8? F (96? F-32)*(5/9)=35. 56? C 7893mg*(1lb/453592mg)=0. 0174lb 36? C*(9/5)+32=96. 8? F (96? F-32)*(5/9)=35. 56? C 3 cups*(. 237L/1cup)=. 711L 2. 25oz*(29. 57cc/1oz)=66. 53cc 145,000uL*(1tsp/4928. 92uL)= 29. 42tsp 3 cups*(. 237L/1cup)=. 711L 2. 25oz*(29. 57cc/1oz)=66. 53cc 145,000uL*(1tsp/4928. 92uL)= 29. 42tsp 45,000 uL = 29. 42 tsp96? F= 35. 56 ? C D. What advantages does the metric system have over the English method of measurement? What are the disadvantages? The metric system is advantageous because it has a base of ten, making measurements easier to take, read, understand, and convert. The prefixes are also standard so they transfer between all measurements. Also, more co untries use the metric system whereas basically only the US uses the English method. The main disadvantage of the metric system is that Americans have not grown up with these measurements so they are harder to picture and understand what distance, weight, etc. ach measurement is. For example, it is much easier for most Americans to understand the distance of a mile than to try and picture how long a kilometer is. E. Outline the steps necessary to accurately weigh 3. 5 g of starch. This depends on the scale used, but with the pen scale included in the labpaq, tare a bag or other container that can be used. Then add in the starch until the weight on the scale reads the weight of the container plus 3. 5 g. F. Outline the steps necessary to accurately pipet 5 mL of distilled water. Pour an aliquot of distilled water into a clean beaker. Put a little more than 5mL of distilled water in a beaker. Pipet 5mL from the beaker, and check to see if the bottom of the meniscus lines up with the 5mL line. Exercise 2: Microscopy The compound light microscope effectively magnifies in the range of 40x to 2000x. If an object under view is 10 nm in length without any magnification, what will be its viewing size at 40x? 400nm at 2000x? 20 ? m What is the equivalent size at these magnifications, in inches? Show your calculations. 400nm*(1cm/10^7nm)*(1in/2. 54cm)= 1. 57*10^-5 in. 20? m*(1cm/10^4? m)*(1in/2. 54cm)= 7. 87*10^-4 in. The scanning electron microscope (SEM) employs electron bombardment to image very small specimens. Electron microscopes are used to image specimens that range from 1 nm to 100  µm in size. What is the equivalent in inches? . Show your calculations. 1nm*(1cm/10^7nm)*(1in/2. 54cm)= 3. 94*10^-8 in. 100 ? m*(1cm/10^4? m)*(1in/2. 54cm)= 0. 0039 in. Procedure 1. Parts of the Compound Light Microscope: Refer to a microscope as this section is read. Label the microscope diagram that follows as the examination of the microscope proceeds. a. Eyepiece (Ocular Lens): The magnification power is stamped on the outside of the lens. What is the power of the ocular lens? Microscopes may have interchangeable ocular lenses of different magnification. 15x b. Body Tube: Holds the ocular and objective lenses at the correct focal distance. c. Arm: Used to transport microscope and hold the body tube. d. Nosepiece: The revolving device that holds the objective lenses. May also be referred to as the turret. e. Objective Lenses: Consists of one or more lenses: i. The scanning power objective lens is the shortest of the lenses. What is its power? 4x ii. The low-power objective is slightly longer than the scanning objective. What is its power? 10x iii. The high-power objective is longer than the low-power objective. What is its power? 40x Label this microscope diagram with the appropriate part names and their functions: Eye piece- lens that you look through Body tube- Piece that leaves distance between lenses Course adjustment knob- adjusts focus Nosepiece- turns the lenses Objective lenses- magnify objects Stage- holds slides Mirror- reflects light so you can see what’s on the slides Base- bottom of microscope allowing stability Arm- Supports the tube and connects everything Eye piece- lens that you look through Body tube- Piece that leaves distance between lenses Course adjustment knob- adjusts focus Nosepiece- turns the lenses Objective lenses- magnify objects Stage- holds slides Mirror- reflects light so you can see what’s on the slides Base- bottom of microscope allowing stability Arm- Supports the tube and connects everything a b c d e f g h i Parts not included in microscope are: Light source Source: Sharma, Abhishake. Labeled Microscope Drawing. N. d. Buzzle. com. 2. Focusing the Microscope: If the microscope includes an oil immersion lens, place a drop of immersion oil on the slide cover slip before rotating the lens into place. The function of the oil is to minimize light diffraction through the slide and subject so that greater detail can be seen. After using the oil immersion lens, clean excess oil off of the lens and the slide with a lens cloth. Never tilt a microscope when using oil or if viewing a wet slide. Why? The liquid could come off of the slide and get into a place in the microscope that isn’t good for it, and it will be messy also. 3. Operating the Microscope: a. Obtain a clean slide and cover slip from the slide box. Place the slide and cover slip separately on a paper towel or other soft surface to reduce the possibility of scratching them. . With scissors, cut a letter â€Å"e† from an old magazine or newspaper. c. Place the letter in the center of the slide. d. Follow the instructions in Section 6 below to make a wet mount of the letter. e. Following the directions outlined above under Handling and Focusing the Microscope, place the prepared slide on the microscope stage. Leav e the scanning lens in place and focus so that the letter is clearly viewable. Make drawings of the letter in the boxes below as instructed. Side of the slide furthest away from student| Look from the side of the microscope, viewand then draw the letter here, as it appears onthe slide on the stage. | e e Draw the letter here as it appears when viewing it through the microscope. | Side of the slide closest to student| f. What is observed? Microscopes invert the image on the slide. This means that the subject will appear to be 180 ° rotated and reversed from the actual image viewed on the slide. g. While viewing the letter through the lenses, move the slide slightly. What do you observe about the movement of the letter and slide when viewed through the lenses? When I move the slide up, what I’m viewing moves down. When I move the slide to the left, the image moves right. . Use the directions above to view the letter at the higher objective powers. On the drawing made above, c ircle the portion of the letter that is viewable as successively higher power observations are made. What is your conclusion about what happens when higher power objectives are used? Only a piece of the top part is viewable. Higher power objectives magnify the image more. 4. Total Magnification Calculation: Typically, the ocular lens of a microscope will be 10x, but it may be higher or lower. The power is recorded on the side of the lens. a. What is the ocular lens power of the microscope that you are using? It may be 10x or 15x. Record it in Table 1. b. The objective lenses also have the magnification power recorded on their sides. What powers do the objective lenses on the microscope have? Record them in Table 1. c. Now, calculate the total magnification of the viewing area by multiplying the power of the ocular lens with that of the objective lens in use. For instance, if a microscope has a 10x magnification ocular lens and a 4x objective lens in place for viewing, the total magnification will be 40x (10x multiplied by 4x). What other view magnifications are possible with the microscope? Calculate the total magnification for each set of lenses in Table 1. Table 1: Calculating Magnification Ocular Lens Magnification x| Objective LensesMagnification =| Total Magnification| 15x| 4x| 60x| | 10x| 150x| | 40x| 600x| 5. Diameter of Field: a. With the low-power objective in viewing position, place a short transparent metric ruler on the stage. b. While viewing the ruler through the lenses, measure the low-power diameter of field of view in mm. Convert this measurement to ? m and record in Table 2. c. Switch to the other higher power objectives, noting the diameter, in mm, for each in Table 2. Convert measurements to ? m. How might this information be useful when viewing microscopic subjects? Micrometers are smaller, so it is useful for very small objects when mm would be a very small number that wouldn’t be very understandable. Table 2: Diameter of a Viewing Field | Magnification(ocular x objective lens’powers)| mm diameterof field of view| ? m diameter *of field of view| Scanning Lens| 60x| 2mm| 2000 ? m| Low Power Lens| 150x| 1mm| 1000 ? m| High Power Lens| 600x| Can’t tell, How to cite Lab 2: Microscopy and the Metric System, Essay examples

Evaluation of the Effectiveness and Efficiency of ICT Systems

Question: Discuss about the Evaluation of the Effectiveness and Efficiency of ICT Systems in Woolworths Organization. Answer: Introduction The development and implementation of technology had been helpful for modifying the information system. The main goal of implementing the ICT or information system communication technologies for the various business organizations had been for recovering the absurd requirements of global extension (Keller and Heiko 2014). The development of the organization had been largely influenced by the deployment of the technologies and tools used. The organization had been facing some major issues in the development of the system integration in the organization. The various operations of the organization had been managed by the use of the technological development and effective tools. The development of the organization had depended upon the influence of the ICT technologies and the techniques used for modifying the operations of the organization (Gustafson et al. 2015). It is important for the manipulation of the existing operations and development of the organization. The following assignment is a report that would provide the benefit of evaluating the ICT development and implementation in the organization. The role of the strategic management had been helpful for modifying the tools and provides the infrastructure for the modification of the organizations operations. The report would consider the organization of Woolworths and its development. The Work Centred Analysis, Balanced Scorecard, Porters Five Forces, and SWOT analysis of the Woolworths had been done for considering the evaluation of the strategic management of the organization. The development of the organization and its specific functionalities had been largely influenced by the role of the compatibility of operations. The report would highlight the role played by the themes of the informatics in achieving the objectives of the project. Background of the Organization Woolworths is a major retail company in Australia that provides the benefit of the overall sales of day to day household goods and commodities (Woolworthsgroup.com.au. 2017). The operations of the organization had been largely dependent on the online activities and web services along with traditional brick and mortar operations. The role of the organization had been largely dependent on the influence of the technology and techniques. It is important for modifying the development of the functions and forming insolvency of the operations. The organization had started their operations with sales through their general stores and outlets. The people had to go to their shops and stores for buying any commodity for their household purpose. The development of the operations had been largely induced by the formation of the operations and development of the functionality (Keller and Heiko 2014). The operations of the organization had resulted in the development of the functions of Woolworths. It is improbable for the operations of the organization for providing the support to the development of functions. The modification of the operations in Woolworths had been largely influenced by the definite deployment of the operations in the organization. Woolworths provides its customers with the benefit of various services such as commodities of daily use, food materials, bakery products, dairy products, and confectionary options. The development of the technology had caused the modification of products and services for the operations of the organization (Gustafson et al. 2015). The influence of the operations had caused the development of functions within the organization. Using Classic Themes of Informatics for Achieving the Objectives Woolworths is a global supermarket chain that had been established from Australian country and later on with the help of technology spread throughout the globe (Woolworthsgroup.com.au. 2017). The objectives of Woolworths include the development of faster and more effective operations, global market capture, and indulging more customers in the organization. The services of Woolworths are based on the development of the technology and use of classic themes for the informatics of the language communication, foundation and implementation, recovering and deployment, and technological construction with systematically development of organization (Law, Buhalis and Cobanoglu 2014). The following section would provide some useful functions developed with the help of these classic themes and theories. The classical theme of the language communication is based on the development of the communication system in the organization and development of the functions. It is important for the development of the proper plan and technological development (Hashim 2015). The language based communication is necessary for the completion of the operations of the organization. The communication provides the development of the functions for the implementation. The theme language would be required for the development of the electronic communication in the organization. The electronic communication methods had included in the development of the operations for the organization. Some of them are telephonic conversation, emails, messages, and social media chats (Ayvaz et al. 2017). The technological development had provided the ease of communication in the organization and development of the more improved functions in the organization. It is important for the compliance of the communication method in the operations of the organization. The telephonic conversation provides a faster communication method when it is required for the development of the operations (Law, Buhalis and Cobanoglu 2014). The role of communication had been sufficiently helpful in modifying the development of the smart technological operations and convey of plan in the organization. The foundation and implementation theme is helpful for the initiation of any operation in the operations of the organization (Serin 2015). The development of the functions had caused the influence of the modification in the organization. The foundation of the operations and development methods had been crucially influenced by the role of the key stakeholders. The operations of Woolworths are largely influenced by the foundation of new technologies and implementing the technology by a plan. The technological development had been crucial for the modification of the operations in the organization. The foundation of new and improved technologies and implementing them for the services of Woolworths has been helpful for growth of the organization. The role played by the classic theme of foundation and implementation had resulted in deploying the successive benefit of the organization (Button, Harrington and Belan 2014). It is important for the modification of the ongoing tools and processe s for the development of the organization. The recovering and deployment theme had been largely influenced by the requirement of the modification in the organization (Serin 2015). The operations of the organization had modified the development of the operations and formation of the functions for more effective and smart benefit in the organization. The increase in the functions of the organization had deployed the need for the implementation of recovering and deployment. The recovering in an organization is helpful for deploying any change within the organization. There is possibility that while deploying an information system in Woolworths, the data might get erased or lost. The recovery option would allow them for recovering the data lost. The deployment is helpful for forming a proper plan for installing any changes required in the organization (Munoz-Miralles et al. 2016). It is important for modifying the ongoing facilities of the organization and development of the more crucial important in the organization. The classic theme of technological construction is based on the development of the functions and influence of the organization (Opara and Onyije 2014). The technological construction had largely influenced the development of the functions in the organization. It is important for the development of the proper plan and technological development. The technology would be required for the development of the electronic operations in the organization. The technological development had provided the ease of development for the functions in the organization. The development of the functions had caused the influence of the modification in the organization. The operations of Woolworths are largely influenced by the foundation of new technologies and implementing the technology. The technological development had been crucial for the modification of the operations in the organization (Button, Harrington and Belan 2014). For example- the use of web services had been a result of the development of t echnology in Woolworths The theme of systematically development is influenced by the development technologies in Woolworths (Munoz-Miralles et al. 2016). The foundation of the operations and development methods had been crucially influenced by the development methods used. The operations of Woolworths are largely influenced by the foundation of new technologies and implementing the technology. It is important for the modification of the ongoing tools and processes for the development of the organization. The operations of the organization had modified the development of the operations and formation of the functions for more effective and smart benefit in the organization (Opara and Onyije 2014). The increase in the functions of the organization had deployed the need for the implementation of recovering and deployment. Assessment of efficiency and effectiveness of Woolworths The development of technology had seen the role played by the more influenced operations and the functions. Woolworths had gradually developed from traditional methods of operations to the web services (Tong, Tak and Wong 2015). The operations of the organization had been largely dependent on the online activities and web services along with traditional brick and mortar operations. The role of the organization had been largely dependent on the influence of the technology and techniques. The development of the operations had been largely induced by the formation of the operations and development of the functionality. The operations of the organization had resulted in the development of the functions of Woolworths (Arli et al. 2013). The modification of the operations in Woolworths had been largely influenced by the definite deployment of the operations in the organization. The assessment of the ongoing technologies and functions had been influenced by the use of strategic management t ools and functions. The strategic management tools and functions had been largely helpful for the development of some evaluation on the technology and tools used in Woolworths (Kurtz 2015). The four tools used for the analysis are Work Centred Analysis, SWOT analysis, Porters Five Forces analysis, and the Balanced Scorecard. The Work centred analysis is helpful for evaluating the missing and existent technology in Woolworths. The SWOT analysis would provide an analysis of Strengths, Weaknesses, Opportunities, and Threats for the Woolworths. The Porters five forces model is the study of the five forces model for the operations of the Woolworths. The balanced scorecard would provide the evaluation of the ease of implementing ICT technologies in the organization system. These four tools would provide the ease of evaluation of the ICT technologies for Woolworths. Work Centred Analysis of Woolworths Work Centred Analysis would be helpful for evaluating the development of the technology and implementation of the improved technologies (Tong, Tak and Wong 2015). The work centred analysis would be helpful for providing the development of the operations in the organization. The work centred analysis is based on the human resources for the modification of the organization in information system development. The social work system provides influence to the development operations and functional improvement. The Woolworths utilizes the raw materials, capabilities, technology, and information system for forming the best possible services to the organization and development of the operations (Marshall 2013). The role of the work centred analysis is for forming a bridge for evaluation of the services provided by developed tools and system (Kurtz 2015). The development of the organization had been studied and provided for the development of the operations. Woolworths is helpful for forming an inclusive and smart technological development of operations in the organization (Taylor 2015). The retail operations of the organization had deployed for the modification of the customer friendly approaches in the organization. The work centric development had been critically evaluated for the modification of the customer friendly approaches in the organization. Woolworths have been using management information system for the development of technology and modification of the system developed tools and techniques. The information system developed would be helpful for forming an effective and smart development option for the organization to be more effective and viable for modification (Riggins and Weber 2016). The Business intelligence system and the ERP system is also utilized by Woolworths for forming an effective and smart technological dependent operations and services to its users. SWOT analysis for Woolworths The SWOT analysis is a measure of the positive and negative aspects of the organization (Bull et al. 2016). It is divided into four parts and they are Strengths, Weaknesses, Opportunities, and Threats. The strengths section evaluates the points of crucial success factors or the possible benefits of the organization with the operations of the organization. The weaknesses section evaluates the points of downfall for the organization that can result in negating the operations of the organization. The opportunities points out the various factors that can accelerate the development of the organization and provide benefit to it. The threats point out the various factors that might result in hindering the process of development and improvement of the organization (Chen, Kim and Yamaguchi 2014). The SWOT analysis of Woolworths would provide an analysis of all these factors for the technological development of the operations and improvement of the organization. The use of various technological developments had provided the points of success and development in the organization. It is important for the improvement of the inbuilt functions in the organization (Taylor 2015). The modification of the inbuilt functions had deployed for the role of the improvement of the functions in the organization. The Woolworths had been getting benefit of the technological improvement of the operations. The complexities of the implementation tools and system development had been the weak points in the implementation of the operations. The role played by the development of the operations had resulted in modifying the system functions for the services of the organization. The cost and time required had proved to be threat for the implementation of the ICT services in the Woolworths (Riggins and Weber 2016). The development of the functions and faster operations of the organization would serve the purpose of the opportunities in the organization. The systematic d evelopment of the functions had been helpful for forming the absolute development of the organization. Porters five forces model for Woolworths The porters five forces model is the analysis of the some factors within an organization and it operations (Gale et al. 2013). The Porters five forces model consists of five functions such as bargaining power of buyer, bargaining power of suppliers, threat of new entrant, threat of substitute, and degree of rivalry. The bargaining power of buyer is the study of the impact or influence of the buyer on the operations of the organization and is classified in terms of high, medium high, medium, medium low, and low. The bargaining power of suppliers is the study of the impact or influence of the suppliers on the operations of the organization and is classified in terms of high, medium high, medium, medium low, and low. The threat of new entrant is a measure of the threat that is faced by the organization when a new provider of same services and products in introduces and is classified in terms of high, medium high, medium, medium low, and low (Wildevuur and Simonse 2015). The threat of su bstitute is a measure of the threat that is faced by the organization when a new substitute product or service is introduced and it is classified in terms of high, medium high, medium, medium low, and low. The degree of rivalry is a measure of the intensity of the rivalry faced between any rival company and the organization. Woolworths is a major company that provides the influence of the development of the operations of the organization and influence of the functions (Wildevuur and Simonse 2015). The porters five forces analysis for Woolworths have been helpful for forming the effective and smart analysis of the factors like bargaining power of buyer, bargaining power of suppliers, threat of new entrant, threat of substitute, and degree of rivalry. The bargaining power of buyer is the study of the impact or influence of the buyer on the operations of the organization and for Woolworths it is high as the organization is customer dependent (Jones et al. 2014). The bargaining power of suppliers is the study of the impact or influence of the suppliers on the operations of the organization and for Woolworths it is low as the organization has its own source of farm, bakery and poultry products. The threat of new entrant is a measure of the threat that is faced by the organization when a new provider of same s ervices and products is introduced and for Woolworths it is medium as there are some organizations that are trying to capture the Woolworth market. The threat of substitute is a measure of the threat that is faced by the organization when a new substitute product or service is introduced and for Woolworths it is low as the organization had been supplying day to day needed commodities and supply (Thistlethwaite et al. 2014). The degree of rivalry is a measure of the intensity of the rivalry faced and for Woolworths it is high as the organization had major rivalry with the local market vendors and supplier. Balanced Scorecard for Woolworths The balanced Scorecard is models that is used for evaluating the strategic information system of the organization and develop some ideas for the improvement of the operations (Vu 2013). The balanced scorecard allows the development of the objectives and modification of the system developed functions in the organization. The role played by the business integrated operations is evaluated with the improvement of the functions and integration of the console. The tool is used for analyzing the efficiency and modification of the operations. The ratios used for Woolworths include the analysis of past, present, and future development of operations. The risks and weaknesses of the problems would be deduced for the evaluation of the balanced scorecard perspectives (E. Dobbs 2014). The balanced scorecard for Woolworths had shown that the development of the operations and its dependency on various factors. The various factors like cost, labour expenses, commodity prices, and other components had been helpful for forming the evaluation of the operations of the system. Recommendations The deployment of the ICT technologies and implementation of information system had deployed the role for the modification of the ongoing technologies and tools. There are some recommendations that could be followed for successful implementation of the ICT technologies in Woolworths and they are, Follow Waterfall Model for development: The waterfall model is helpful for forming the development of operations in the organization. Woolworths would be assisted for compliance of the ICT technologies and their existing system with the help of waterfall model of software development. The software development would be helpful for increasing the efficiency of operations in the organization. The role played by the waterfall model would be helpful for assisting the functions of the organization. Waterfall model is a step by step process and it involves modification of the system developed tools and functions in the organization. Formation of a Plan: The formation of a plan would be helpful for modifying the functions and develop some methods for implementing the ICT technologies. It is important for forming the successful implementation of the technology. The plan making can be done by using project management concepts and tools. The strategies developed would be helpful for making the operations of the organization more effective and viable. Improve Security Measures: The security measures would be helpful for the successful implementation of the operations of the organization. The security measures would be helpful for forming more effective and smart implementation of the operations. The security of the ICT can be deployed by the use of user authentication and identity verification. The encryption is another factor that develops some effective and smart methods for forming continuous development of operations. Implementation Plan Figure 1: Implementation Plan for ICT in Woolworths (Source: Created by the author in MS-project) Conclusion The operations of the organization had been largely dependent on the online activities and web services along with traditional brick and mortar operations. The role of the organization had been largely dependent on the influence of the technology and techniques. The objectives of Woolworths include the development of faster and more effective operations, global market capture, and indulging more customers in the organization. The classical theme of the language communication had provided the ease of communication in the organization and development of the more improved functions in the organization. The foundation and implementation theme had caused the influence of the modification and it had been crucially influenced by the role of the key stakeholders. The recovering and deployment theme had been largely influenced by the requirement of the modification in the organization. The classic theme of technological construction had largely influenced the development of the functions in t he organization. The theme of systematically development been crucially influenced by the development methods used. The social work system had influenced the development operations and functional improvement and formed a bridge for evaluation of the services provided by developed tools and system. References Arli, V., Dylke, S., Burgess, R., Campus, R. and Soldo, E., 2013. Woolworths Australia and Walmart US: Best practices in supply chain collaboration.Journal of Economics, Business Accountancy Ventura,16(1). Ayvaz, Z., Balaban, M.O. and Kong, K.J.W., 2017. Effects of Different Brining Methods on Some Physical Properties of Liquid Smoked King Salmon.Journal of Food Processing and Preservation,41(1). Bull, J.W., Jobstvogt, N., Bhnke-Henrichs, A., Mascarenhas, A., Sitas, N., Baulcomb, C., Lambini, C.K., Rawlins, M., Baral, H., Zhringer, J. and Carter-Silk, E., 2016. Strengths, weaknesses, opportunities and threats: A SWOT analysis of the ecosystem services framework.Ecosystem services,17, pp.99-111. Button, D., Harrington, A. and Belan, I., 2014. E-learning information communication technology (ICT) in nursing education: A review of the literature.Nurse Education Today,34(10), pp.1311-1323. Chen, W.M., Kim, H. and Yamaguchi, H., 2014. Renewable energy in eastern Asia: Renewable energy policy review and comparative SWOT analysis for promoting renewable energy in Japan, South Korea, and Taiwan.Energy Policy,74, pp.319-329. Dobbs, M., 2014. Guidelines for applying Porter's five forces framework: a set of industry analysis templates.Competitiveness Review,24(1), pp.32-45. Gale, N.K., Heath, G., Cameron, E., Rashid, S. and Redwood, S., 2013. Using the framework method for the analysis of qualitative data in multi-disciplinary health research.BMC medical research methodology,13(1), p.117. Gustafson, D.H., McTavish, F., Mahoney, J.E., Johnson, R.A., Lee, J.D., Quanbeck, A., Atwood, A.K., Isham, A., Veeramani, R., Clemson, L. and Shah, D., 2015. The effect of an information and communication technology (ICT) on older adults quality of life: study protocol for a randomized control trial.Trials,16(1), p.191. Hashim, J., 2015. Information communication technology (ICT) adoption among SME owners in Malaysia.International Journal of Business and Information,2(2). Jones, P., Simmons, G., Packham, G., Beynon-Davies, P. and Pickernell, D., 2014. An exploration of the attitudes and strategic responses of sole-proprietor micro-enterprises in adopting information and communication technology.International Small Business Journal,32(3), pp.285-306. Keller, J. and Heiko, A., 2014. The influence of information and communication technology (ICT) on future foresight processesResults from a Delphi survey.Technological Forecasting and Social Change,85, pp.81-92. Kurtz, T.E., 2015. Approaches for Developing a Model for Information and Communication Technology (ICT) Implementation in the Higher Education Environment. Law, R., Buhalis, D. and Cobanoglu, C., 2014. Progress on information and communication technologies in hospitality and tourism.International Journal of Contemporary Hospitality Management,26(5), pp.727-750. Marshall, S., 2013. Evaluating the strategic and leadership challenges of MOOCs.Journal of Online Learning and Teaching,9(2), p.216. Muoz-Miralles, R., Ortega-Gonzlez, R., Lpez-Morn, M.R., Batalla-Martnez, C., Manresa, J.M., Montell-Jordana, N., Chamarro, A., Carbonell, X. and Torn-Monserrat, P., 2016. The problematic use of Information and Communication Technologies (ICT) in adolescents by the cross sectional JOITIC study.BMC pediatrics,16(1), p.140. Opara, J.A. and Onyije, L.E., 2014. Information and Communication Technologies (ICT): a panacea to achieving effective goals in institutional administration.International Letters of Social and Humanistic Sciences, (12), pp.81-87. Riggins, F. and Weber, D., 2016. Exploring the impact of information and communication technology (ICT) on intermediation market structure in the microfinance industry.The African Journal of Information Systems,8(3), p.1. Serin, G., 2015. The Effect of Gender and Professional Development in Information and Communication Technology (ICT) on Science Teachers Use of Classroom Practices.Anadolu Journal Of Educational Sciences International,5(1). Taylor, P., 2015. The importance of information and communication technologies (ICTs): An integration of the extant literature on ICT adoption in small and medium enterprises. Thistlethwaite, J.E., Forman, D., Matthews, L.R., Rogers, G.D., Steketee, C. and Yassine, T., 2014. Competencies and frameworks in interprofessional education: a comparative analysis.Academic Medicine,89(6), pp.869-875. Tong, C., Tak, W.I.W. and Wong, A., 2015. The Impact of knowledge sharing on the relationship between organizational culture and Job satisfaction: The perception of information communication and technology (ICT) practitioners in Hong Kong.International Journal of Human Resource Studies,5(1), p.19. Vu, K.M., 2013. Information and communication technology (ICT) and Singapores economic growth.Information Economics and policy,25(4), pp.284-300. Wildevuur, S.E. and Simonse, L.W., 2015. Information and communication technologyenabled person-centered care for the big five chronic conditions: scoping review.Journal of medical Internet research,17(3), p.e77. Woolworthsgroup.com.au. (2017).The Woolworths Story - Woolworths Group. [online] Available at: https://www.woolworthsgroup.com.au/page/about-us/The_Woolworths_Story/How_We_Were_Founded [Accessed 16 Apr. 2017]. Woolworthsgroup.com.au. (2017).Woolworths Group: Quality Brands and Trusted Retailing. [online] Available at: https://www.woolworthsgroup.com.au/ [Accessed 16 Apr. 2017].